Skip to main content

Write a Review

$12,549.99
E-Caliber 9.9 XTR is a light, fun, and fast carbon e-MTB. It's built to ride like a traditional cross country bike, and it even has the same race-worthy suspension tech as Supercaliber. The sleek and subtle Fazua drive system provides a boost without adding bulk, and you get a spec loaded with high-end parts. It's right for you if... You wanna ride your heart out on a lightweight e-MTB that rips singletrack just like a regular XC bike, but can give you a leg-saving boost when you want it. You also want the smoothest, lightest, more precise parts spec, filled with carbon and cutting edge tech like our IsoStrut shock. The tech you get A lightweight, full OCLV Mountain Carbon frame with 60mm of travel, a 120mm FOX Factory 34 Step-Cast fork, dual remote lockout, and Trek's exclusive lightweight IsoStrut FOX Factory shock. A Fazua Evation motor and 250Wh battery that can assist up to 20 mph when it's on, and gives zero drag when it's off, plus a handlebar-mounted Fazua Remote FX controller. A Shimano XTR drivetrain, a Bontrager XXX carbon seatpost, and Kovee XXX 30 carbon wheels. The final word Our top-shelf E-Caliber is light, fast, and built to rip. It rides like an XC race bike—like a Supercaliber, in fact—until you decide you want a little boost to scramble up a climb or put in a few extra laps. Why you'll love it - You get a helping hand from the motor on climbs and long rides, but it's a more natural-feeling assist that gives you an overall experience that's closer to riding an analog bike than a typical e-MTB - The drive system, including the motor, is easily removable. Just take it out, pop on the included cover, and you'll have a standard mountain bike that weighs 2.9kg less than before - IsoStrut gives you just enough rear suspension for cross country traction and comfort with less weight and more efficiency - Pivotless seat stays save on weight and actively bend to help soak up trail chatter - Wider Kovee XXX 30 wheels are crazy light, really strong, and provide better tire support so you can run lower pressure and get more traction
$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$110.00
A cozy companion for chilly days that seamlessly combines style and comfort, our S-Logo Pullover Hoodie is crafted from a plush 14-ounce heavyweight cotton fleece that envelops you in softness and warmth. The rib-knit cuffs and hem provide a secure fit, keeping the cold air out and ensuring you stay snug in any weather. Featuring a screen-printed S-logo on the left chest, this hoodie adds a distinctive touch to your casual attire. The relaxed fit, offering generous space in the chest and shoulders, combined with unisex sizing, makes it a versatile addition to your wardrobe. Complete with a front kangaroo pocket for added functionality, our S-Logo Pullover Hoodie is a winter essential for comfort with style. - 14-ounce heavyweight cotton fleece is soft and warm. - Rib-knit cuffs and hem keep the cold air out. - Front kangaroo pocket. - Screen-printed S-logo on the left chest. - Relaxed fit is roomy in the chest and shoulders. - Unisex sizing. - Fabric Content: 100% Cotton (14 oz).
$10.99
Keep your handlebar organized and your devices secure with the SpaceMount Clamp from Minoura. - Single action multipurpose clamp fits almost anywhere on the bike - Small: red logo, 22mm–29mm clamp diameter - Medium: black logo, 28mm–35mm clamp diameter - Alloy body and stainless steel lever - Clamp body has one (1) M5 thread hole in center
$74.95
- 14mm hardened MAX-Performance steel shackle resists both cutters and leverage attacks - Double deadbolt locking mechanism has extensive holding power - High security, disc-style cylinder with reinforced anti-drill, anti-pull protection system - Sliding dust cover protects and extends cylinder life - 3 stainless steel keys—one lighted with high-intensity bulb & replaceable battery - Key Safe Program - Product dimensions: 1.8” x 2.1” (48mm x 54mm) - Product weight: 1.85 lbs (0.84 kgs)
$22.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$184.99
If you put long hours into the saddle, you know comfort is a key element of your endurance capacity. The CB Carbon 2 shorts are designed to offer lasting performance and comfort with features and fabrics that won’t let you down half-way through. The ergonomic fit of the shorts is combined with the use of highly stretchable and compressive CB Carbon + LYCRA and Endurexx fabrics which results in increased blood flow, reduced muscle vibration and reduced fatigue. The V-shaped waist evenly distributes pressure for a comfortable fit, and an Aero Lazer band is used at the thigh for a smooth transition that improves aerodynamics and muscle support. Technical Details: - Bottoms Fabric : CB Carbon + LYCRA fiber: This fabric offers great compression and antistatic properties and helps improve blood circulation - Polartec Highlander Mesh: Four-way stretchable mesh with excellent moisture management that allows quick drying and great comfort - Bottoms Fabric Technology: coldblack treatment reflects UV rays for cooling - Garment Feature Bottoms : Aero single-layer, laser-cut bottom - Bottom Inseam : 8.5" / 21.5 cm - Bottoms Seams: Flatlock seams - Bottoms Visibility Features: Back reflective accents, Front reflective accent - Bottoms Waist: HugFit V-shaped waist: Evenly distributes pressure around the waist for a comfortable fit - 4 Motion Chamois - Women
$32.00
SRAM's NX trigger shifter with X-ACTUATION technology gives you sharp, dependable shifting. Built for precise and swift shifting across SRAM's wide range 11-speed cassette, the NX trigger shifter brings industry changing technology to everyone. - X-ACTUATION for precise and dependable 11-speed performance - Fully compatible with all SRAM 1x drivetrains - Weight: 142 grams - Speeds: 1 x 11 - Colors: Black
$40.00 - $45.00
Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. StarFade will transform any bike into a head-turner with a blast of color and flashy graphics. - Super Sticky PU (top layer): Superior supple hand feel with long lasting performance. Extremely advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maximizes grip. - Tackiest/best hand feel - Long-lasting PU tape 1 Set includes: - Two Super Sticky Kush tape rolls - Two aluminum laser-etched Star Plugz (powder coated or anodized) - Two high-end rubberized finish tapes
$11.99 $12.00 On Sale
Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws
$689.99 - $743.00
The SRAM RED crankset leverages a pivotal design innovation: smaller chainrings and a wider cassette range. This leads to smoother and faster shifting up front and more useful gearing for today's riders. The new configurations improve cadence and efficiency while also delivering shifts that are crisp, clean and quick-every time. Features - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Improved front shifting performance for crisp and accurate front shifts - Unique chainring design results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability, simplicity and broad compatibility - Power upgradeable Specifications - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs, GXP/PF GXP 68mm - Chainring Size: 46/33, 48/35, 50/37 - Crank arm length: 165mm, 167.5mm, 170mm, 172.5mm, 175mm - Chainline: 45.0mm - BB Spindle Interface: 24mm, DUB - Chainring material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD): Direct Mount (DM) - Crank arm material: Carbon
$19.99 - $47.99 $80.00 Up to 75% Off
Our Trail Shorts are an essential for any trail rider's wardrobe. They're lightweight, durable, and downright comfortable—everything you need for an afternoon shred. - 11.5" inseam (size MD) fall low around the knee for a roomy fit that leaves plenty of room for pads. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Does not include a liner. - Fabric Content: 100% Polyester - Front fly and button closure. - One zippered pocket and one hand pocket provide convenient, secure space to store your trail essentials. - Side waist adjustment tabs ensure that the fit of the shorts is easily customizable and dialed-in, even when your pockets are loaded. - VaporRize woven fabrics are durable, stretchy, and lightweight for peace of mind on the trail.
$1,599.00
Journeyer is Salsa's gateway to all-road adventures. The geometry provides comfort and confidence on any road surface. Versatile cargo carrying options extend riding range and allow for many different missions. It all comes together to create the perfect introduction to all-road riding. - 6061-T6 alloy frame - Salsa Waxwing carbon fork with mid-blade rack mounts, fender mounts, Three-Pack mounts, and internal dynamo cable routing - Flat mount brakes - Internal cable routing including stealth dropper post routing - Water, tool, and accessory mounts on frame and fork allow for longer rides - Compatible with 700c and 650b wheels and tires
$21.49
- Threads onto 3/8" axles - Double-sided - Oversized - Alloy - Length: 3" / 74mm - Width: .94" / 24mm - Sold as a pair
$6,500.00
Nothing is faster than the Tarmac SL8 thanks to a combination of aerodynamics, light weight, and ride quality previously thought impossible. After eight generations and over two decades of development, it's more than the fastest Tarmac ever—it's the world's fastest race bike. Your legs up for it? AERO IN EVERYTHING We're putting aero where it matters—the leading edge—not just where it looks good. In the process we've created our most aerodynamic road bike ever. Yes, it's more aero than the Venge. Clean air is optimized for maximum advantage with the Tarmac's new nose cone—the Speed Sniffer. By moving the steer tube back—the tube that determines head tube width—the leading edge of the head tube can be much sharper, delivering a much lower drag shape. Utilizing new UCI rules, the Tarmac SL8 has the narrowest, most aero seat post we've ever made ensuring fast-moving, dirty air around the legs can flow back more cleanly. Doesn't victory smell sweet? GOES LIKE HELL, RIDES LIKE HEAVEN With massive gains in stiffness-to-weight—an improvement of 33% over the SL7—the Tarmac SL8 takes legendary handling, aggressive responsiveness, and World Championship proven geometry to the next level. The bike is stiffer at the pedals, more precise at the bars, and combines it with a compliant ride in the saddle that sets a new benchmark for race bike comfort. Thanks to our Rider-First Engineering, every rider, regardless of size, gets the same unprecedented ride quality and handling. In the saddle the Tarmac SL8 delivers 6% more compliance, floating over rough roads with a supple feel unique in the high-strung world of race bikes. Tarmac's proven geometry and 32mm tire clearance are identical to the SL7, ensuring easy adaptation and the versatility to run higher volume tires when needed. BEYOND GENDER There can be more differences between two male cyclists than between a male and female. Gender alone doesn't provide nearly enough data to specialize and that means creating male or female bikes is arbitrary and outdated. Every rider can get the next-level advantage of Tarmac SL8. It's time to go Beyond Gender. The Tarmac SL8 Expert delivers exceptional performance with a full SRAM Rival eTap AXS groupset with a power meter, C38 carbon tubeless-ready wheelset and an SL7 stem with Specialized Expert Shallow Drop alloy handlebars makes for an accessible performance-packed bike.
$214.00
Elevating the shift, expanding the capable, the X01 Eagle derailleur features an updated cage architecture to provide better chain management than ever. The X01 Eagle rear derailleur works with the new 10-52T cassettes and is backward-compatible with 10-50T options, as well. - Updated cage provides better chain retention and more precise shifts - Backward-compatible design works with 10-50T and 10-52T cassettes
$69.95
Replacement XD driver freehub body for Trail and Vantage 2-piece Ritchey hubs. - SRAM XD
$35.00
Most riders should protect the lowers and crowns of their MTB forks. Fork protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the fork. RideWrap protection kits are high-quality polyurethane films that are applied to the fork to protect lowers and crowns from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - The Covered Fork Kit includes protection for crowns, lowers, and extra pieces to provide approximately 60% fork coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet
$150.00 - $185.00
So, you have disc brakes, and only the best is good enough for you. Now, you can mount a Tubus carrier on your bike. Their Disco is designed to be combined with disc brakes. Instead of using added accessories, the Disco simply fits onto your frame. The carrier is easy to mount using the included quick release, or it can also be mounted on eyelets of the frame. Simply load up your bike and go. - Includes QR Skewer
$5,299.00
Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5 Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe carbon fork features a 12 x 100 mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)
$1,599.00
The SRAM X0 Eagle T-Type AXS™ Transmission groupset is their most robust high-performance transmission. This T-Type transmission takes a holistic approach to a bicycles shifting, an entire system synchronized, providing you with a superior ride experience. - AXS™ Pod ULT features a “click and fire” two-button design that transforms the crucial act of rider inputs into a vastly more personal experience for all your AXS™ controls - Engineered as integrated, interdependent transmission components, the X0 Eagle T-Type rear derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface - X0 T-Type derailleur offers the same intuitive pairing and set-up procedure as SRAM's Eagle AXS™ derailleurs - Derailleur features an overload clutch that boosts resiliency and a tucked-in profile that houses protection covers on the fully replaceable B-knuckle and outer link - The X0 Eagle T-Type 10-52t cassette and derailleur contact directly, ensuring perfect alignment on every bike - Shifting under load is made possible on the X0 Eagle T-Type cassette due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output - The X0 T-Type DUB all-aluminum crankset is the most advanced aluminum crankset SRAM has ever made and provides riders with a perfectly balanced stiffness to weight ratio - Crankset includes a removable 2-Guard aluminum bashguard for more rugged terrain to protect your chainring
$22.50 $30.00 25% Off
- Branded screen print on the chest. - Fabric Content: 85% drirelease Polyester, 15% Elastane
$9.29 - $20.39
- Valve: Presta - Butyl rubber - Wall thickness: 0.9mm
$11.95
Quitting time? End of the day? Stress levels too high? You know what time it is, time to wine down! Grapes, wine bottles and glasses on a light blue sock. Yeah, that's what we are talking about. Product Features: - Ultra-wicking acrylic base with superior softness and stretch to eliminate hot spots and blisters. - Mesh upper for ultimate airflow. - Classic double-over cuff never falls down. - Unique Stretch-to-Fit sizing system for a perfect fit on a wide range of foot sizes. - Double-stitched nylon heel & toe for durability and longevity. - Off-beat, original designs only SockGuy can provide! - Cuff Height : 2" - Made with : S/M - Style : Flat-knit; Standard * : S/M only
$47.95 - $64.95
For finding your way off-road. For more comfort. For the adventure. Be it the long tour or the shortcut on your way home, the Terra gravel series by Continental gets you there over rough and smooth. Choose another road, choose Terra. - A user-optimized tubeless system is specifically designed for road cycling demands. Easy to install and reliable in use. - ProTection technology gives our tires the perfect mix of fast rolling, grip, and puncture protection. Four plies under the tread and three in the sidewalls result in greater resilience and less vulnerability to damage. - A specifically developed tubeless bead seals through its unique shape and provides a stable fit on the rim.
$160.00
While pants may be the latest fashion for all the "cool kids", they have some serious function too. Protecting you when you inevitably hit the dirt is obvious, but a barrier between your precious legs and all the poky, poisonous things that trails can offer is an added bonus. Oh, and don't you worry—with the Gravity Pants, you're gonna show up to the trailhead with plenty of style. Taking the protection of our Trail Pants to the next level, we developed the Gravity Pants with a hefty amount of CORDURA to protect both them and you when a crash happens. To keep things cool, we added laser perforated venting to keep you and your knee pads from getting overly sweaty. Speaking of knee pads, we left the fit roomy enough to fit any armor you may want but slim-fitting enough to make sure they aren't getting caught on saddles or chains/chainrings. - Laser perforated venting adds sophisticated points of ventilation that don't detract from the durability or performance of the pants. - Patches with high abrasion-resistance bonded to the knee area for support and protection in this sensitive crash location. - Waist adjustment tab ensures that the fit is easily customizable and dialed-in. - Tapered legs help to prevent anything getting caught in the chain. - Unisex fit. - Fabric Content: MAIN: 89% CORDURA® Nylon, 11% Elastane, OTHER: 57% Nylon, 43% Spandex
$53.99 - $57.99
Imagination is the only limitation to how much the microSHIFT bar-end shifters can do. Their small, minimalistic designs are packed with precision machined mechanism that allows you to shift accurately with either index or friction mode. Go on any adventure without worries for mechanical issues. - Includes shift cables
$20.00 - $25.00
Superior hand feel that you need to feel to believe. Winner of world cups, Cape Epics, and stages of La Ruta de Conquistadores. - Material: Dual-density high-performance rubber - Supacaz pattern design for max control and ultimate tackiness - Diameter: 32mm - Star Ringz: 100% Aluminum - Anodized/powder coated - Laser-etched
$52.99
- Material: Aluminum - Chain Compatibility: HG 7-8 speed - Pedal Spindle: 9/16'' - Bottom Bracket: Not included - BB-UN26 or BB-UN55 110mm for double or 113mm for triple - Alloy outer chainring
$32.99
Precision Fit The Mayhem glove is the lightest of all the O’Neal gloves! This resilient glove allows for easy mobility in all types of riding and features an ultra-flexible, formed palm for a long lasting precision fit. - Pre-curved fit for maximum comfort - Durable, non-fade multi-colored graphics - Long-lasting and flexible materials for the perfect fit and 4-way Stretch Lycra panels for added comfort and flexibility - Single-layer vented Nanofront palm offers unrestricted feel and control while giving great durability - Seamless rollover fingertips - Adjustable hook-and-loop wrist closure for a secure and adjustable fit - Designed for use with smartphone and tablet screens - Does not cover the wrist. Does not minimize risk of riding. - 60% Polyester, 25% Nylon, 10% synthetic leather, 5% TPR
Page 1 of 566 Next page